Have any question? support@tikdis.com
[currency_switcher format="%code%"]
  • da
  • en
  • en-gb
  • bn
  • en-ie
  • en-eu

SXT 5

USD89

SXT 5 is a low cost, high transmit power 5GHz outdoor wireless device. Up to 1250mW transmit power! SXT 5 can be used for point to point links or as a CPE for point to multipoint installations.

Complete with a ready to mount enclosure and built-in 16dBi antenna, the package contains everything you need to make a point to point link, or connect to an AP.

Box contains: one SXT 5, PoE injector, 24V power adapter, mounting bracket, metallic mounting loop.

SXT install guide:

Product specifications

Details
Product code RBSXT5HPnDr2
CPU AR9344
CPU nominal frequency (per core) 600 MHz
CPU core count 1
Size of RAM 64 MB
Storage type NAND
Storage size 64 MB
Number of USB ports 1
PoE in Yes
Dimensions 140x140x56mm, 265g
Operating System RouterOS
License level 3
Tested ambient temperature -30 .. +70C
Max Power consumption 11W
Voltage Monitor Yes
PCB temperature monitor Yes
USB Power Reset Yes
USB slot type USB type A
Architecture MIPS-BE
Supported Voltage 5 V - 30 V
Wireless standards 802.11a/n
Wireless chip model AR9344
Antenna gain DBI 16
Number of chains 2
10/100 Ethernet ports 1

Wireless specifications

5 GHz
Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 30 -96 1000
54MBit/s 27 -81 501
MCS0 30 -96 1000
MCS7 26 -77 398
wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RBSXT5HPnDr2 AR9344 100M 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 148.0 75.8
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 87.6 44.9
Routing none (fast path) 8.1 98.4 23.5 96.3 148.0 75.8
Routing 25 simple queues 8.1 98.4 23.5 96.3 106.6 54.6
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results