Have any question? support@tikdis.com
[currency_switcher format="%code%"]
  • da
  • en
  • en-gb
  • bn
  • en-ie
  • en-eu

RB433L

The RB433L has three miniPCI slots and three Ethernet ports - it's low-cost version of popular RB433 model.

Use this device in an outdoor case for a sector AP installation, or for a wireless backhaul. Three ports give you plenty of configuration options for many wireless scenarios.

It’s powered by an Atheros 300MHz CPU and has 64MB of RAM and a Level4 RouterOS license.

Product specifications

Details
Product code RB433L
CPU AR7130
CPU nominal frequency (per core) 300 MHz
Size of RAM 64 MB
Dimensions 105 mm x 154 mm
Operating System RouterOS
License level L4
Voltage Monitor Yes
10/100 Ethernet ports 3
PoE in 8-28V DC on Ether1
MiniPCI slots 3

Ethernet test results

RB433L AR7130 100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none 16.2 196.7 47.0 192.5 97.3 49.8
Bridging 25 bridge filter rules 16.2 196.7 40.6 166.3 41.0 21.0
Routing none 16.2 196.7 47.0 192.5 79.4 40.7
Routing 25 simple queues 16.2 196.7 47.0 192.5 67.8 34.7
Routing 25 ip filter rules 16.2 196.7 28.9 118.4 24.7 12.6
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results