Have any question? support@tikdis.com
Related products
PowerBox
USD69
CCR1072-1G-8S+
USD3,050
RB2011iLS-IN
USD109
RB2011UiAS-IN
USD119
CCR1009-8G-1S-PC
USD425RB2011iL-IN
USD99
The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.
The RB2011iL-IN is the most basic model, with five Gigabit ethernet ports, five Fast ethernet ports, power jack and PoE support.
It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license.
There is PoE output function for port #10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.
RouterBOARD 2011iL-IN comes with desktop enclosure and power supply.
Wall mount kit for network closet is available for purchase as an optional accessory.
Product specifications
| Details | |
|---|---|
| Product code | RB2011iL-IN |
| CPU | AR9344 |
| CPU nominal frequency (per core) | 600 MHz |
| CPU core count | 1 |
| Size of RAM | 64 MB |
| Storage type | NAND |
| Storage size | 128 MB |
| 10/100/1000 Ethernet ports | 5 |
| Power Jack | 1 |
| PoE in | Yes |
| Dimensions | 214x86mm |
| Operating System | RouterOS |
| License level | 4 |
| Tested ambient temperature | -35C to +65C |
| Max Power consumption | 6W |
| Architecture | MIPS-BE |
| Supported Voltage | 8 V - 30 V |
| PoE out | Yes |
| 10/100 Ethernet ports | 5 |
Included parts
Ethernet test results
| RB2011iL-IN | AR9344 1G&100M all port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 122.0 | 1,481.6 | 232.0 | 950.3 | 269.6 | 138.0 |
| Bridging | 25 bridge filter rules | 83.6 | 1,015.2 | 86.0 | 352.3 | 87.6 | 44.9 |
| Routing | none (fast path) | 122.0 | 1,481.6 | 210.0 | 860.2 | 226.9 | 116.2 |
| Routing | 25 simple queues | 100.5 | 1,220.5 | 103.9 | 425.6 | 106.6 | 54.6 |
| Routing | 25 ip filter rules | 56.8 | 689.8 | 59.6 | 244.1 | 60.5 | 31.0 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results