Have any question? support@tikdis.com
[currency_switcher format="%code%"]
  • da
  • en
  • en-gb
  • bn
  • en-ie
  • en-eu

NetBox 5

USD109

The NetBox is a dual chain outdoor client device with RP-SMA connectors for antennas, and a cable hood for protection against moisture. This device supports the new 802.11a/n/ac standard for increased wireless speed (866Mbit datarate, and 20/40/80MHz channels).

The case can be opened with one hand, and is protected against the elements. Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.

Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.

Product specifications

Details
Product code RB911G-5HPacD-NB
CPU QCA9557
CPU nominal frequency (per core) 720 MHz
CPU core count 1
Size of RAM 128 MB
Storage type NAND
Storage size 128 MB
10/100/1000 Ethernet ports 1
PoE in Yes
Operating System RouterOS
License level 4
Max Power consumption 11.5W
Voltage Monitor Yes
PCB temperature monitor Yes
Supported Voltage 8 V - 30 V
Wireless standards 802.11a/n/ac
Wireless chip model QCA9882
Number of chains 2

Wireless specifications

5 GHz
Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 31 -96 1259
54MBit/s 27 -81 501
MCS0 30 -96 1000
MCS7 27 -77 501
MCS9 22 -72 158
wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RB911G-5HPacD-NB QCA9557 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.2 986.1 234.9 962.2 477.7 244.6
Bridging 25 bridge filter rules 81.2 986.1 118.4 485.0 119.5 61.2
Routing none (fast path) 81.2 986.1 234.9 962.2 408.2 209.0
Routing 25 simple queues 81.2 986.1 158.3 648.4 165.8 84.9
Routing 25 ip filter rules 64.8 786.9 70.4 288.4 60.9 31.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results