Have any question? support@tikdis.com
[currency_switcher format="%code%"]
  • da
  • en
  • en-gb
  • bn
  • en-ie
  • en-eu

Metal 5

USD99

The new, completely waterproof, rugged, and super high powered RouterBOARD Metal. The serious outdoor wireless device!

Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. 1300mW of output power - to reach the last mile, in any conditions! It comes with L4 license, so you can attach your favorite 5Ghz antennna to use it as an AP, to make wireless point-to-point links or as a CPE- whatever you prefer!

It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

Package contains Metal-5SHPn, mounting loops, PoE injector, power adapter

Product specifications

Details
Product code RBMetal5SHPn
CPU AR7241
CPU nominal frequency (per core) 400 MHz
CPU core count 1
Size of RAM 64 MB
Storage type NAND
Storage size 128 MB
PoE in Yes
Dimensions 177x44x44mm, 193g
Operating System RouterOS
License level 4
Tested ambient temperature -30C to +70C
Max Power consumption 11.5W
Voltage Monitor Yes
PCB temperature monitor Yes
Architecture MIPS-BE
Supported Voltage 9 V - 30 V
Wireless standards 802.11a/n
Wireless chip model AR9280
Number of chains 1
10/100 Ethernet ports 1

Wireless specifications

5 GHz
Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 31 -93 1259
54MBit/s 27 -77 501
MCS0 30 -92 1000
MCS7 28 -71 631
wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RBMetal5SHPn AR7241 100M 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.6 23.5 96.3 148.0 75.8
Bridging 25 bridge filter rules 8.1 98.6 23.5 96.3 53.7 27.5
Routing none (fast path) 8.1 98.6 23.5 96.3 148.0 75.8
Routing 25 simple queues 8.1 98.6 23.5 96.3 92.8 47.5
Routing 25 ip filter rules 8.1 98.6 23.5 96.3 37.5 19.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results