LDF 5

USD39

The LDF (Lite Dish Feed) is an outdoor wireless system with a built in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal.

This means you can use any available satellite TV dish with an offset mount to quickly deploy powerful long range wireless links. The offset mount is universal at 40mm diameter, and the LDF can easily
be placed inside it. Since the LDF itself is a tiny little package, it makes shipping and deployment simple and low cost.

Using a dish of up to 100cm in diameter, it is
possible to obtain antenna amplification of up
to 33dBi. The device comes preinstalled with
RouterOS and is ready to use.

Product specifications

Details
Product codeRBLDF-5nD
CPUAR9344
CPU nominal frequency (per core)600 MHz
CPU core count1
Size of RAM64 MB
Storage typeFLASH
Storage size16 MB
PoE inYes
Dimensions84x84x115mm
Operating SystemRouterOS
License level3
Tested ambient temperature-40°C .. +70°C
Max Power consumption6W
Supported Voltage10 V - 28 V
Wireless standards802.11a/n
Wireless chip modelAR9344
Antenna gain DBI9
Number of chains2
10/100 Ethernet ports1

Wireless specifications

5 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
6MBit/s25-96316
54MBit/s20-80100
MCS025-96316
MCS719-7579
wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RBLDF-5nDAR9344 (600MHz) 100M 1 port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)8.198.423.596.3182.593.4
Bridging25 bridge filter rules8.198.423.596.387.644.9
Routingnone (fast path)8.198.423.596.3182.593.4
Routing25 simple queues8.198.423.596.3106.654.6
Routing25 ip filter rules8.198.423.596.360.531.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results