Have any question? support@tikdis.com
Related products
CCR1009-7G-1C-1S+
USD495
RB1100AHx2-LM
Discontinued Products
RB2011iLS-IN
USD109
CCR1009-8G-1S
USD425
RB2011iL-RM
USD99hEX PoE
USD79
hEX PoE is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded.
Product specifications
| Details | |
|---|---|
| Product code | RB960PGS |
| CPU | QCA9557 |
| CPU nominal frequency (per core) | 800 MHz |
| CPU core count | 1 |
| Size of RAM | 128 MB |
| Storage type | FLASH |
| Storage size | 16 MB |
| 10/100/1000 Ethernet ports | 5 |
| Number of USB ports | 1 |
| Power Jack | 1 |
| License level | 4 |
| Tested ambient temperature | -40 + 70 C |
| Max Power consumption | 9W |
| Voltage Monitor | Yes |
| PCB temperature monitor | Yes |
| SFP+ ports | 1 |
| USB Power Reset | Yes |
| USB slot type | USB type A |
| Supported Voltage | 12 V - 57 V |
| PoE in | Passive |
| PoE out Text | 802.3at |
Included parts
Ethernet test results
| RB960PGS | QCA9557 (800Mhz) 1G all port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 161.9 | 1,966.1 | 401.5 | 1,644.5 | 542.3 | 277.7 |
| Bridging | 25 bridge filter rules | 143.2 | 1,739.0 | 145.5 | 596.0 | 146.2 | 74.9 |
| Routing | none (fast path) | 161.9 | 1,966.1 | 396.3 | 1,623.2 | 521.7 | 267.1 |
| Routing | 25 simple queues | 161.9 | 1,966.1 | 217.2 | 889.7 | 216.0 | 110.6 |
| Routing | 25 ip filter rules | 74.6 | 905.9 | 78.0 | 319.5 | 76.5 | 39.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results