Have any question? support@tikdis.com
[currency_switcher format="%code%"]
  • da
  • en
  • en-gb
  • bn
  • en-ie
  • en-eu

hAP lite classic

USD22

The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office.

It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button.

Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others.

The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included.

Product specifications

Details
Product code RB941-2nD
CPU QCA9533
CPU nominal frequency (per core) 650 MHz
CPU core count 1
Size of RAM 32 MB
Storage type FLASH
Storage size 16 MB
Power Jack 1
Operating System RouterOS
License level 4
Tested ambient temperature -20 + 70 C
Max Power consumption 3.5W
Supported Voltage 5 V - 5 V
Wireless standards 802.11b/g/n
Wireless chip model QCA9533
Antenna gain DBI 1.5
Number of chains 2
10/100 Ethernet ports 4

Wireless specifications

2.4 GHz
Transmit power (dBm) Receive Sensitivity Transmit power (mW)
1MBit/s 22 -96 158
11MBit/s 22 -89 158
6MBit/s 20 -93 100
54MBit/s 18 -74 63
MCS0 20 -93 100
MCS7 16 -71 40

Ethernet test results

RB941-2nD QCA9531 (650Mhz) 100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 32.5 394.8 94.0 385.0 173.6 88.9
Bridging 25 bridge filter rules 32.5 394.8 56.1 229.8 56.7 29.0
Routing none (fast path) 32.5 394.8 94.0 385.0 160.8 82.3
Routing 25 simple queues 32.5 394.8 63.7 260.9 72.6 37.2
Routing 25 ip filter rules 32.5 394.8 33.8 138.4 34.6 17.7
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results