Have any question? support@tikdis.com
[currency_switcher format="%code%"]
  • da
  • en
  • en-gb
  • bn
  • en-ie
  • en-eu

hAP ac

USD129

The hAP ac is our most universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes.

The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location.

Other helpful features include a USB port for attaching extra storage or a 3G/4G modem, PoE output on the last Ethernet port, to power other RouterBOARD devices without needing an extra power adapter and an SFP cage, for connecting active or passive optical network modules.

We have two versions available.

- RB962UiGS-5HacT2HnT-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- RB962UiGS-5HacT2HnT (International) supports 2412-2484MHz and 5150MHz-5875MHz range.

Product specifications

Details
Product code RB962UiGS-5HacT2HnT
CPU QCA9558
CPU nominal frequency (per core) 720 MHz
CPU core count 1
Size of RAM 128 MB
Storage type FLASH
Storage size 16 MB
10/100/1000 Ethernet ports 5
Number of USB ports 1
Power Jack 1
Supported input voltage 11 V - 57 V
PoE in Yes
Dimensions 114 x 137 x 29mm
Operating System RouterOS
License level 4
Tested ambient temperature -20C .. +60C
Max Power consumption 17W
Voltage Monitor Yes
PCB temperature monitor Yes
SFP+ ports 1
USB Power Reset Yes
USB slot type USB type A
Wireless standards 802.11a/n/ac
Wireless chip model QCA9880
Secondary wireless standards 802.11b/g/n
Secondary wireless chip model QCA9558
Antenna gain DBI 2
Number of chains 3

Wireless specifications

5 GHz
Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 28 -96 631
54MBit/s 25 -81 316
MCS0 28 -96 631
MCS7 24 -77 251
MCS9 21 -72 126
 

wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RB962UiGS-5HacT2HnT QCA9558 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 161.9 1,966.1 345.5 1,415.2 435.6 223.0
Bridging 25 bridge filter rules 125.5 1,524.1 126.5 518.1 128.8 65.9
Routing none (fast path) 161.9 1,966.1 334.2 1,368.9 397.9 203.7
Routing 25 simple queues 161.9 1,966.1 183.9 753.3 203.3 104.1
Routing 25 ip filter rules 78.1 948.4 77.8 318.7 77.5 39.7
  • All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  • Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  • Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  • Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results