Have any question? support@tikdis.com
[currency_switcher format="%code%"]
  • da
  • en
  • en-gb
  • bn
  • en-ie
  • en-eu

Groove 52 ac

USD79

Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS.

Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless.

Product specifications

Details
Product code RBGrooveG-52HPacn
CPU QCA9556
CPU nominal frequency (per core) 720 MHz
CPU core count 1
Size of RAM 64 MB
Storage type FLASH
Storage size 16 MB
10/100/1000 Ethernet ports 1
PoE in Yes
Dimensions 177 x 44 x 44 mm
Operating System RouterOS
License level 3
Tested ambient temperature -40 +70 C
Max Power consumption 5W
Voltage Monitor Yes
PCB temperature monitor Yes
Supported Voltage 10 V - 30 V
Wireless standards 802.11a/b/g/n/ac
Wireless chip model QCA-9889
Number of chains 1

Wireless specifications

2.4 GHz
Transmit power (dBm) Receive Sensitivity Transmit power (mW)
1MBit/s 24 -97 251
11MBit/s 21 -91 126
6MBit/s 24 -93 251
54MBit/s 21 -77 126
MCS0 24 -93 251
MCS7 20 -72 100
5 GHz
Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 26 -93 398
54MBit/s 21 -78 126
MCS0 26 -93 398
MCS7 21 -74 126
MCS9 19 -69 79
wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RBGrooveG-52HPacn QCA9556 1G one port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.2 986.1 233.1 954.8 576.7 295.3
Bridging 25 bridge filter rules 81.2 986.1 123.7 506.7 117.8 60.3
Routing none (fast path) 81.2 986.1 233.1 954.8 454.8 232.9
Routing 25 simple queues 81.2 986.1 152.6 625.0 137.2 70.2
Routing 25 ip filter rules 69.4 842.8 66.3 271.6 68.7 35.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results