Have any question? support@tikdis.com
[currency_switcher format="%code%"]
  • da
  • en
  • en-gb
  • bn
  • en-ie
  • en-eu

CRS125-24G-1S-2HnD-IN

USD209

Cloud Router Switch is our new Smart Switch series. It combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.

What’s more - this device has a built in 2.4GHz wireless access point, this means you can have an AP, a router with any number of ports, and a full wire speed smart switch, all in one device - ideal for medium/small businesses and offices. It has 24 Gigabit ports, one SFP cage, a microUSB port and a built in Wireless AP.

Perfect SOHO gateway router, switch, 11n AP all in one box

  • Ethernet, Fiber, or 4G (with optional USB modem) gateway connection to Internet
  • RouterOS gateway/firewall/VPN router with passive cooling
  • up to twenty-five gigabit switch ports (1xSFP and 24xRJ45)
  • 1000mW high power 2.4GHz 11n wireless AP

Product specifications

Details
Product code CRS125-24G-1S-2HnD-IN
CPU AR9344
CPU nominal frequency (per core) 600 MHz
CPU core count 1
Size of RAM 128 MB
Storage type NAND
Storage size 128 MB
10/100/1000 Ethernet ports 24
Number of USB ports 1
Power Jack 1
PoE in Yes
Dimensions 285x145x45mm
Operating System RouterOS
License level 5
Tested ambient temperature -35C to +65C
Max Power consumption 19W
Voltage Monitor Yes
PCB temperature monitor Yes
SFP+ ports 1
USB slot type microUSB type AB
Serial port RJ45
SFP DDMI Yes
Architecture MIPS-BE
Supported Voltage 8 V - 28 V
Wireless standards 802.11b/g/n
Wireless chip model AR9344
Antenna gain DBI 4
Number of chains 2

Wireless specifications

2.4 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
1MBit/s29-97794
11MBit/s28-90631
6MBit/s30-961000
54MBit/s25-76316
MCS030-961000
MCS723-73200

wireless parameters may be limited in software, depending on your local regulatory limitations

Switching results

CRS125-24G-1S-2HnD-IN
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Switching Non blocking Layer 2 throughput 37,202.4 19,047.6 5,874.1 24,060.2 2,031.9 24,674.9
Switching Non blocking Layer 2 capacity 37,202.4 38,095.2 5,874.1 48,120.3 2,031.9 49,349.8
Switching Non blocking Layer 1 throughput 37,202.4 25,000.0 5,874.1 25,000.0 2,031.9 25,000.0
Switching Non blocking Layer 1 capacity 37,202.4 50,000.0 5,874.1 50,000.0 2,031.9 50,000.0

Ethernet test results

CRS125-24G-1S-2HnD-IN AR9344 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.0 983.7 232.0 950.3 269.6 138.0
Bridging 25 bridge filter rules 81.0 983.7 86.0 352.3 87.6 44.9
Routing none (fast path) 81.0 983.7 210.0 860.2 226.9 116.2
Routing 25 simple queues 81.0 983.7 103.9 425.6 106.6 54.6
Routing 25 ip filter rules 56.8 689.8 59.6 244.1 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results