Have any question? support@tikdis.com
[currency_switcher format="%code%"]
  • da
  • en
  • en-gb
  • bn
  • en-ie
  • en-eu

CRS112-8G-4S-IN

USD139

Cloud Router Switch 112-8G-4S-IN is a “small size low cost” member of our CRS series. It comes with eight Gigabit Ethernet ports and four SFP cages.

Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS.

All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.

Product specifications

Details
Product code CRS112-8G-4S-IN
CPU QCA8511
CPU nominal frequency (per core) 400 MHz
CPU core count 1
Size of RAM 128 MB
Storage type FLASH
Storage size 16 MB
10/100/1000 Ethernet ports 8
Power Jack 1
PoE in Yes
Dimensions 200x143x44mm
Operating System RouterOS
License level 5
Tested ambient temperature -30C to +55C
Max Power consumption 13.5W
Voltage Monitor Yes
PCB temperature monitor Yes
Current Monitor Yes
SFP+ ports 4
Serial port RJ45
Supported Voltage 10 V - 57 V

Switching results

CRS112-8G-4S-IN
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Switching Non blocking Layer 2 throughput 17,857.1 9,142.9 2,819.5 11,548.9 975.3 11,844.0
Switching Non blocking Layer 2 capacity 17,857.1 18,285.7 2,819.5 23,097.7 975.3 23,687.9
Switching Non blocking Layer 1 throughput 17,857.1 12,000.0 2,819.5 12,000.0 975.3 12,000.0
Switching Non blocking Layer 1 capacity 17,857.1 24,000.0 2,819.5 24,000.0 975.3 24,000.0

Ethernet test results

CRS112-8G-4S-IN QCA8511 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none 48.0 582.9 73.5 301.1 78.0 39.9
Bridging 25 bridge filter rules 26.1 317.0 28.6 117.1 29.6 15.2
Routing none 46.5 564.7 65.7 269.1 71.1 36.4
Routing 25 simple queues 14.5 176.1 16.1 65.9 16.8 8.6
Routing 25 ip filter rules 7.8 94.7 8.0 32.8 8.3 4.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results