CCR1036-12G-4S-EM
USD1,195
CCR1036-12G-4S-EM is an carrier grade router with a cutting edge 36 core Tilera CPU! Unprecedented power and unbeatable performance - this is our new flagship device. Over 20 times faster than our previous top model, the Cloud Core supports throughput of up to 24 million packets per second, or up to 16 gigabits - full wire speed.
The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, serial console and a USB port. A color touchscreen displays device status, traffic graphs, or provide access to simple configuration options.
It has two SODIMM slots, by default it is shipped with 16GB of RAM, but has no memory limit in RouterOS. It comes with power supply and 1U rackmount case.
The cloud core router is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.
Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)
See our product video:
Product specifications
| Details | |
|---|---|
| Product code | CCR1036-12G-4S-EM |
| CPU | TLR4-03680CG-12CE-A3b |
| CPU nominal frequency (per core) | 1200 MHz |
| CPU core count | 36 |
| Size of RAM | 16384 MB |
| Storage type | NAND |
| Storage size | 1024 MB |
| 10/100/1000 Ethernet ports | 12 |
| Number of USB ports | 1 |
| Power Jack | 1 |
| Dimensions | 355x145x44mm |
| Operating System | RouterOS |
| License level | 6 |
| Tested ambient temperature | -20C .. +60C |
| Max Power consumption | 60W |
| Voltage Monitor | Yes |
| PCB temperature monitor | Yes |
| CPU temperature monitor | Yes |
| Current Monitor | Yes |
| SFP+ ports | 4 |
| USB slot type | microUSB type AB |
| Serial port | RS232 |
| SFP DDMI | Yes |
| Architecture | TILE |
| Supported Voltage | 12 V - 28 V |
Included parts
Ethernet test results
| CCR1036-12G-4S-EM | Tile 36 core max possible throughput test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 1300.4 | 15792.1 | 3759.4 | 15398.5 | 28808.0 | 14749.7 |
| Bridging | 25 bridge filter rules | 1300.4 | 15792.1 | 3760.4 | 15402.6 | 5163.5 | 2643.7 |
| Routing | none (fast path) | 1300.4 | 15792.1 | 3762.4 | 15410.8 | 28808.0 | 14749.7 |
| Routing | 25 simple queues | 1300.4 | 15792.1 | 3762.4 | 15410.8 | 7643.1 | 3913.3 |
| Routing | 25 ip filter rules | 1300.4 | 15792.1 | 3033.9 | 12426.9 | 3049.7 | 1561.4 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results