BaseBox 5

USD89

The RB912 in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device.

The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.

Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector

and power supply unit.

Box contains: RB912 outdoor unit, PSU, PoE injector, mounting loop, DIN rail mount

Product specifications

Details
Product codeRB912UAG-5HPnD-OUT
CPUAR9342
CPU nominal frequency (per core)600 MHz
CPU core count1
Size of RAM64 MB
Storage typeNAND
Storage size64 MB
10/100/1000 Ethernet ports1
Number of USB ports1
PoE inYes
Dimensions246x135x50mm
Operating SystemRouterOS
License level4
Tested ambient temperature-30C to +60C
Max Power consumption14W at 24v
Voltage MonitorYes
PCB temperature monitorYes
USB slot typeUSB type A
ArchitectureMIPS-BE
Supported Voltage8 V - 30 V
Wireless standards802.11a/n
Wireless chip modelAR9342
Number of chains2
MiniPCI-e slots1

Wireless specifications

5 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
6MBit/s30-961000
54MBit/s27-78501
MCS030-961000
MCS726-75398
wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RB912UAG-5HPnD-OUTAR9342 1G 1 port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)81.0983.7232.0950.3269.6138.0
Bridging25 bridge filter rules81.0983.786.0352.387.644.9
Routingnone (fast path)81.0983.7210.0860.2226.9116.2
Routing25 simple queues81.0983.7103.9425.6106.654.6
Routing25 ip filter rules56.8689.859.6244.160.531.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results