Have any question? support@tikdis.com
[currency_switcher format="%code%"]
  • da
  • en
  • en-gb
  • bn
  • en-ie
  • en-eu

911 Lite5 ac

USD49

The 911 Lite5 ac is upgrade for our low-cost 911 Lite5 dual model.

It’s a small CPE type RouterBOARD wireless router with an integrated 5Ghz dual-chain wireless card, now with added 802.11ac support. It’s equipped with powerful 650MHz CPU and 64MB, great for building custom 5Ghz CPE or Backhaul units. Unit is equipped with 10/100Mbps Ethernet port.

We have two versions available.

RB911-5HacD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed

RB911-5HacD (International) supports 5150MHz-5875MHz range.

Product specifications

Details
Product code RB911-5HacD
CPU QCA9531
CPU nominal frequency (per core) 650 MHz
CPU core count 1
Size of RAM 64 MB
Storage type FLASH
Storage size 16 MB
PoE in Yes
Dimensions 113 x 89 mm
Operating System RouterOS
License level 3
Max Power consumption 7W
Supported Voltage 10 V - 30 V
Wireless standards 802.11a/n/ac
Wireless chip model QCA9882
Number of chains 2
10/100 Ethernet ports 1

Wireless specifications

5 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
6MBit/s29-95794
54MBit/s26-81398
MCS029-95794
MCS725-77316
MCS922-72158

wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RB911-5HacD QCA9531 100M one port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 173.6 88.9
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 70.9 36.3
Routing none (fast path) 8.1 98.4 23.5 96.3 160.8 82.3
Routing 25 simple queues 8.1 98.4 23.5 96.3 90.8 46.5
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results