The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.
No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.
100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.
|CPU nominal frequency (per core)||1229 MHz|
|CPU core count||9|
|Size of RAM||2048 MB|
|Storage size||128 MB|
|10/100/1000 Ethernet ports||7|
|Number of USB ports||1|
|Supported input voltage||15 V - 57 V|
|Max Power consumption||34W|
|PCB temperature monitor||Yes|
|CPU temperature monitor||Yes|
|USB Power Reset||Yes|
|USB slot type||microUSB type AB|
|CCR1009-7G-1C-1S+||Tile 9 core all port test with combo-port and SFP+|
|Mode||Configuration||1518 byte||512 byte||64 byte|
|Bridging||none (fast path)||1,300.4||15,792.1||3,759.4||15,398.5||17,782.8||9,104.8|
|Bridging||25 bridge filter rules||1,244.4||15,112.0||1,395.3||5,715.1||1,368.1||700.5|
|Routing||none (fast path)||1,300.4||15,792.1||3,759.4||15,398.5||17,411.2||8,914.5|
|Routing||25 simple queues||1,300.4||15,792.1||1,925.6||8,195.4||1,977.0||1,328.5|
|Routing||25 ip filter rules||739.2||8,976.8||793.9||3,378.8||801.8||538.8|