RB2011UiAS-2HnD-IN

USD129

The RB2011Ui is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.

RouterBOARD 2011UiAS-2HnD has most features and interfaces from all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful 1000mW dual chain 2.4Ghz (2312-2732MHz depending on country regulations) 802.11bgn wireless AP, RJ45 serial port, microUSB port and RouterOS L5 license, as well as desktop case with power supply, two 4dBi Omni antennas and LCD panel- all this for only $129!

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

RouterBOARD 2011UAS-2HnD-IN comes with desktop enclosure, LCD panel and power supply.

Wall mount kit (product code RBWMK) for network closet is available for purchase as an optional accessory.

Product specifications

Details
Product codeRB2011UiAS-2HnD-IN
CPUAR9344
CPU nominal frequency (per core)600 MHz
CPU core count1
Size of RAM128 MB
Storage typeNAND
Storage size128 MB
10/100/1000 Ethernet ports5
Number of USB ports1
Power Jack1
PoE inYes
Dimensions214mm x 86mm for PCB
Operating SystemRouterOS
License level5
Tested ambient temperature-35C to +65C
Max Power consumption11W
Voltage MonitorYes
PCB temperature monitorYes
SFP+ ports1
USB Power ResetYes
USB slot typemicroUSB type AB
Serial portRJ45
SFP DDMIYes
Supported Voltage8 V - 30 V
Wireless standards802.11b/g/n
Wireless chip modelAR9344
PoE outYes
Antenna gain DBI4
Number of chains2
10/100 Ethernet ports5

Wireless specifications

2.4 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
1MBit/s30-961000
11MBit/s28-80631
6MBit/s30-961000
54MBit/s27-80501
MCS030-921000
MCS725-73316

wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RB2011UiAS-2HnD-INAR9344 1G&100M all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)122.01,481.6232.0950.3269.6138.0
Bridging25 bridge filter rules83.61,015.286.0352.387.644.9
Routingnone (fast path)122.01,481.6210.0860.2226.9116.2
Routing25 simple queues100.51,220.5103.9425.6106.654.6
Routing25 ip filter rules56.8689.859.6244.160.531.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results