cAP

USD50

RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP. Inconspicuously designed, it blends
into the environment, perfect for hospitality business like hotels, airports, shopping malls etc.

cAP-2nD supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for
the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your
AP devices from one central location.

Unlike traditional controller software, which requires a separate PC/Mac to run, our
CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors.

Product specifications

Details
Product codeRBcAP2nD
CPUQCA9533
CPU nominal frequency (per core)650 MHz
CPU core count1
Size of RAM64 MB
Storage typeFLASH
Storage size16 MB
Dimensions185mm diameter, 31mm heigh
Operating SystemRouterOS
License level4
Tested ambient temperature-30C to +70C
Max Power consumption4W
Supported Voltage11 V - 57 V
Wireless standards802.11b/g/n
Wireless chip modelQCA9533
Antenna gain DBI2
Number of chains2
10/100 Ethernet ports1
PoE in802.3af/at

Wireless specifications

2.4 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
1MBit/s22-96158
11MBit/s22-89158
6MBit/s20-93100
54MBit/s18-7463
MCS020-93100
MCS716-7140
wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RBcAP2nDQCA9533 100M one port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)8.198.423.596.3173.688.9
Bridging25 bridge filter rules8.198.423.596.370.936.3
Routingnone (fast path)8.198.423.596.3160.882.3
Routing25 simple queues8.198.423.596.390.846.5
Routing25 ip filter rules8.198.423.596.343.222.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results